BB-16 - Here is the prefabricated bottom…
ready to join to the sides and bulkheads on the jig. The bottom was made by (6”) scarf splicing two 5’ X 9’ X ¾” sheets of marine plywood end to end. There are three internal stringers ¾” thick/high. The two outboard stringers are
5” wide and the center is 10” wide. These internal stringers run the length of the inside of the hull. They were epoxied to the bottom and preloaded in such a way that maintained the shape of the rocker before it was attached to the hull J.
© Copyright 2010 - All Rights Reserved
|Go To Bradley's Offshore Adventures|